Description
The SAER Stainless Steel Well Jet pump M97, 0.75 HP, 115 Volt – 60 HZ, NPT TREAD, BRASS & CAST-IRON IMPELLER. General water supply, pressurization of water by using pressure, vessels (autoclaves) horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications. water pressure booster pump
- Pump body in Stainless Steel
- Diffuser in thermoplastic resin
- Mechanical seal in carbon/ceramic
- Maximum temperature of pumped liquid 5°F to 122°F
- Maximum working pressure 65 psi
- Maximum ambient temperature 104°F; for higher temperatures
Technical Data
| Model | M-97 |
| Brand | Saer-USA |
| Manufacturer’s Warranty | 1 year Limited Warranty |
| Material | Stainless Steel |
| Port Size (in.) | 1 |
| Flow (GPH) | 954 |
| HP | 0.75 |
| Volts | 115V – Single Phase |
| AMP | 8.5 |
| Max. Total Head (ft.) | 148 |
| Max. Suction Lift (ft.) | 17 |
| Max. PSI | 65 |
| Suction Port (in.) | 1 |
| Discharge Port (in.) | 1 |
| Self-Priming | Yes |
| Dimensions L x W x H (in.) | 15.5 x 7.8 x 8.1 |
| Product Weight (lbs.) | 21 |
Tank Specifications
| Product Model | HR020762S4000000 |
| Dimensions L x W x H | 19.7″ x 11″ x 11″ |
| Air Volume Control | Yes |
| Product Weight | 13 lb |
| Tank Material | Iron |
| Product Type | Pressure Tank for potable water |
| Manufacturer Warranty | 3 Years |
| Precharge PSI | 30 psi |
| Max working Pressure | 145 psi |
| Flange Material | Stainless steel |
| Connection Size | 1″ male |
| Certificates | NSF/ANSI 61/IAPMO Z1088-2013 |
| Replaceable Bladder | YES |
| Max Working Temperature | 210°F |
| Product Made | Italy |
The 5.3 Gal. , 30 psi Pre-charge Horizontal Pressure Tank best to save energy. Pressure tanks are a basic element of a potable water system
Electronic pressure switch. Patented model.
This unit SWITCHMATIC 1 is an electronic pressure switch with an integrated digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 kW). Cut-in and cut-out pressure implementation can be set easily and accurately through user friendly control panel. Wiring is carried out identically to a conventional electromechanical switch. It can operate as a differential pressure switch or as an inverted pressure switch.
OPERATING CHARACTERISTICS
– Operation modes: differential, inverted and synchronized (only SWITCHMATIC 2).
– Inner pressure transmitter.
– Integrated pressure gauge with bar and psi instantaneous display.
– User friendly control panel including manual start push-button, 3-digits display, led-lights
and pushbuttons.
– Dry-running protection by minimal pressure (for type SWITCHMATIC 1).
– ART function (Automatic Reset Test). If the device has been stopped due the action of the
safety system against dry operation, the ART tries to connect the pump, with a programmed
periodicity because the water supply could have been restored.
– Rapid-cycle alarm: when the hydropneumatic tank has lost the air and frequent start-stops
are produced an alarm is activated and is delayed the start.
– Sleep mode with low power consumption.
– Advanced configuration menu: differentials, delay settings and other parameters.
