+1 (786) 613-5872
Description
| Model | 5329153 |
| Brand | Gol Pumps |
| Manufacturer’s Warranty | 1 years Limited Warranty |
| Service Factor | 1.25 |
| Motor Material
Pump Material |
Stainless Steel 304
Noryl |
| Volts | 230 – Single Phase |
| In(A)
Imax Istart |
13.9
15.8 74 |
| HP | 2 |
| KW | 1.5 |
| R.P.M | 3450 |
| PF Allowable load %
PF Overload Factor % |
0.97
0.97 |
| Efficiency(Allowable load%)
Efficiency(Overload Factor%) |
70.6
70.7 |
| Need Capacitor Box
Need Starter |
YES
Optional |
| Cable section (AWG) | 14 |
| Cable length (ft.) | 4 |
| Dimensions L x W x H (in.) | 3.8 x 3.8 x 41.5 |
| Product Weight (lbs.) | |
| Production Country | Taiwan |
Gol Pumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
|
PUMP TYPE |
STAGES | MOTOR | Q=DELIVERY | |||||||||
|
GPM |
2.6 | 4 | 5.3 | 6.6 | 8 | 9.2 | 11 | 13.2 | ||||
|
KW |
HP |
H=TOTAL HEAD IN FEET |
||||||||||
| ST-0727 | 27 | 1.5 | 2 | 807 | 732 | 682 | 623 | 561 | 492 | 417 | 243 | |
Dimensions and weights:
|
Single Phase Motor Dimensions and Weights |
||||||
|
Pump Type |
Dimensions (mm) |
Weight (lb) |
||||
|
A |
B |
C |
14.5 | |||
| ST-0727 | 675 | RP/NPT 1-1/4″ | 98 | |||
MOTOR Materials:
- -Upper/Lower Bracket: AISI 304 Over Iron
- -Stator Shell: AISI 304
- -Shaft: AISI 420
- -Seal Cover: Nylon
- -Lip Seal: NBR
- -Diaphragm: NBR
- -Sand Slinger: NBR
- -Lead Wire (Cable): XLPE
- -Bolts and Screws: AISI 304
- -Lead Potting: Epoxy
- -Kingsbury Thrust Bearing: 402J2
PUMP SPEC:
- Max Head(ft): 850
- Max Flow(Gpm): 14
- Discharge: 1 1/4″
- HP: 2
- Pump Material: Noryl
- Pump Model: ST 0727
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoretic treated cast iron plus SS304 cover cap.
- Max. Immersion depth: 985 ft.
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 86°F with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
