Description
6″ Deep Well Submersible Pump
| Brand | Gol Pumps |
| Manufacturer’s Warranty | 1 years Limited Warranty |
| Ship Weight | |
| Service Factor | 1.15 |
| Material | Stainless Steel 304 |
| Volts | 230 – Three Phase |
| In(A) Imax Istart | 27.8 31.6 112 |
| HP | 10 |
| KW | 7.5 |
| R.P.M | 3450 |
| Power factor% (Allowable load) Power factor% (Overload Factor) | 0.84 0.83 |
| Efficiency(Allowable load) Efficiency(Overload Factor) | 79.1 77.7 |
| Need Capacitor Need Starter | No Optional |
| Cable section (AWG) | 4 x 14 |
| Cable length (ft.) | 5.5 |
| Dimensions L x W x H (in.) | 5.5 x 5.5 x 26.1 |
| Product Weight (lbs.) | |
| Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
Pump type | Stages | Power | Current (A) | gal/h I/s | 0 | 3170 | 5283 | 6340 | 7397 | 8454 | 9510 | 10567 | 11888 | |
KW | HP | 0.00 | 3.33 | 5.56 | 6.67 | 7.78 | 8.89 | 10.00 | 11.11 | 12.50 | ||||
| A6X30CR10/05 | 5 | 7.5 | 10 | 14.2 | Head(ft) | 282 | 266 | 246 | 230 | 213 | 197 | 174 | 151 | 115 |
Dimensions and weights:
Pump type | Stages | Power | Dimensions | Weight(lb) | |||||||
KW | HP | L | LM | LP | M | P | Motor | Pump | Total | ||
| A6X30CR10/05 | 5 | 7.5 | 10 | 59 | 30 | 29 | 6 | 5 | 110 | 33 | 143 |
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap. Max. Immersion depth: 200m
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 30°C with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
PUMP SPEC:
- Max Head Pressure (ft): 282ft
- Max Flow(Gpm): 200
- Discharge: 3″
- Volts: 230V – Three Phase
- HP:10
- Pump Material: Stainless Steel 304
- Pump Model: A6X30CR10/05
