BARESHAFT END-SUCTION SINGLE STAGE CENTRIFUGAL PUMPS - JCS-M25017S

BARESHAFT END-SUCTION SINGLE STAGE CENTRIFUGAL PUMPS - JCS-M25017S

BARESHAFT END-SUCTION SINGLE STAGE CENTRIFUGAL PUMPS - JCS-M25017S

USES
Recircling plants, heating, air conditioning, heat recovery, plants of water supply procurement, pressurising units and fire-fighting systems.

CONSTRUCTIVE CHARACTERISTICS
JCS-M25017S: bareshaft end-suction centrifugal pumps, JCS-M25017S: bareshaft end-suction centrifugal pumps with electric motor,
on a base.
The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.
Hydraulics: pump body with dimension and performances according to EN 733 rules (up to 150-400), closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200: PN10.

Applications:

icon_accqueicon_agricolturaicon_civileicon_indicon_minerarioiconoil
Materials: cast iron  (Stainless Steel and Bronze by request only)
INSTALLATION AND OPERATION CHARACTERISTICS:
The JCS-M25017S pumps can be positioned with horizontal, sloping or vertical axis always with the motor upwards .The operating characteristics of the catalogue and label are to be understood for continuous service and with clear water (specific weight = 1000 kg/m3) with a max manometric suction height of approximately 1,5 m. For higher manometric heights and up to a max of approximately 6 m, the characteristics decrease in the various delivery data.
.
------

$11,833.20

Add to Cart

Cart

Search Products

Categories

Category

Facebook

MADE IN ITALY

USES
Recircling plants, heating, air conditioning, heat recovery, plants of water supply procurement, pressurising units and fire-fighting systems.

CONSTRUCTIVE CHARACTERISTICS
JCS-M25017S: bareshaft end-suction centrifugal pumps, JCS-M25017S: bareshaft end-suction centrifugal pumps with electric motor,
on a base.
The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.
Hydraulics: pump body with dimension and performances according to EN 733 rules (up to 150-400), closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200: PN10.

 

Port Size(inch)

DNa

10
DNm

10

 


Applications
:

icon_accqueicon_agricolturaicon_civileicon_indicon_minerarioiconoil
FREE SHIPPING
BARESHAFT END-SUCTION SINGLE STAGE CENTRIFUGAL PUMPS - JCS-M25017S
$11,833.20
%d bloggers like this:

EASY SELECTOR