Free Shipping

WEG SOFT STARTER – 40HP-50HP – 220-575VAC – SSW9 WEG – SSW900B0061T5E2B

Comments Off on WEG SOFT STARTER – 40HP-50HP – 220-575VAC – SSW9 WEG – SSW900B0061T5E2B

Soft-starters are drives dedicated to the smooth acceleration and deceleration of three-phase electric motors, by controlling the voltage applied to the motor. With proper adjustment of the variables, the torque produced is adjusted to the load requirement, thus ensuring that the requested current is the minimum required for starting. The SSW900 is a soft-starter with three-phase motor control, built-in by-pass and torque control. Intended to drive motors from 10 to 1.400 A.

Applications

Centrifugal, reciprocating pumps (sanitation, irrigation and oil), fans, exhausters, blowers, air compressors, refrigeration (screw and piston), mixers, aerators, centrifuges, rock crushers, grinders, woodchippers, paper refiners, rotary ovens, wood saws and planes, ball and hammer mills and load conveyors.

 

Specifications
BrandWEG
ModelSSW900B0061T5E2B
Rated current61A
Power supply220-575V
EnclosureIP20
FrameB

 

colors.png Technical Data

Continue Reading
Free Shipping

WEG SOFT STARTER – 30HP – 220-575VAC – SSW9 WEG – SSW900B0045T5E2B

Comments Off on WEG SOFT STARTER – 30HP – 220-575VAC – SSW9 WEG – SSW900B0045T5E2B

Soft-starters are drives dedicated to the smooth acceleration and deceleration of three-phase electric motors, by controlling the voltage applied to the motor. With proper adjustment of the variables, the torque produced is adjusted to the load requirement, thus ensuring that the requested current is the minimum required for starting. The SSW900 is a soft-starter with three-phase motor control, built-in by-pass and torque control. Intended to drive motors from 10 to 1.400 A.

Applications

Centrifugal, reciprocating pumps (sanitation, irrigation and oil), fans, exhausters, blowers, air compressors, refrigeration (screw and piston), mixers, aerators, centrifuges, rock crushers, grinders, woodchippers, paper refiners, rotary ovens, wood saws and planes, ball and hammer mills and load conveyors.

 

Specifications
BrandWEG
ModelSSW900B0045T5E2B
Rated current45A
Power supply220-575V
EnclosureIP20
FrameB

 

colors.png Technical Data

Continue Reading
Free Shipping

WEG STANDARD PANEL ESWE Series Combination Starters , 7.5HP, 3PHASE ~ 240/120V, 25T02KX-D12

Comments Off on WEG STANDARD PANEL ESWE Series Combination Starters , 7.5HP, 3PHASE ~ 240/120V, 25T02KX-D12

 

ESWE 25T02KX-D12 Series Enclosed Starters  

High performance and optimized solutions for motor starting and control. WEG offers full voltage non-reversing combination starters, ESWE series, up to 20 HP at 460VAC (40A) with or without control power transformers for three-phase applications.


Standard Features:

  • Standard Enclosure Type: non-metallic 4X
  • Control Power Transformer: with or without
    CPT primary 575V – secondary 120V
    CPT primary 480V/240V – secondary 120V
  • Branch Disconnect: rotary through-the-door handle
  • Short-Circuit Protection: manual motor protection
  • Motor Control: magnetic IEC contactor
  • Overload Protection: manual motor protection
  • Standard Control Devices: HAND-OFF-AUTO switch, START and STOP pushbuttons, pilot lights
  • Custom enclosure and control options available upon request
Continue Reading
Free Shipping

WEG STANDARD PANEL ESWE Series Combination Starters 3PH ~ 240/120V, B40T02KX-D14

Comments Off on WEG STANDARD PANEL ESWE Series Combination Starters 3PH ~ 240/120V, B40T02KX-D14

 

ESWE B40T02KX-D14 Series Enclosed Starters  

High performance and optimized solutions for motor starting and control. WEG offers full voltage non-reversing combination starters, ESWE series, up to 20 HP at 460VAC (40A) with or without control power transformers for three-phase applications.


Standard Features:

  • Standard Enclosure Type: non-metallic 4X
  • Control Power Transformer: with or without
    CPT primary 575V – secondary 120V
    CPT primary 480V/240V – secondary 120V
  • Branch Disconnect: rotary through-the-door handle
  • Short-Circuit Protection: manual motor protection
  • Motor Control: magnetic IEC contactor
  • Overload Protection: manual motor protection
  • Standard Control Devices: HAND-OFF-AUTO switch, START and STOP pushbuttons, pilot lights
  • Custom enclosure and control options available upon request
Continue Reading
Free Shipping

WEG STANDARD PANEL ESWE Series Combination Starters 3PH ~ 208/240V – ESWE-B18T02KX-D11

Comments Off on WEG STANDARD PANEL ESWE Series Combination Starters 3PH ~ 208/240V – ESWE-B18T02KX-D11

 

ESWE B18T02KX-D11 Series Enclosed Starters  

High performance and optimized solutions for motor starting and control. WEG offers full voltage non-reversing combination starters, ESWE series, up to 20 HP at 460VAC (40A) with or without control power transformers for three-phase applications.


Standard Features:

  • Standard Enclosure Type: non-metallic 4X
  • Control Power Transformer: with or without
    CPT primary 575V – secondary 120V
    CPT primary 480V/240V – secondary 120V
  • Branch Disconnect: rotary through-the-door handle
  • Short-Circuit Protection: manual motor protection
  • Motor Control: magnetic IEC contactor
  • Overload Protection: manual motor protection
  • Standard Control Devices: HAND-OFF-AUTO switch, START and STOP pushbuttons, pilot lights
  • Custom enclosure and control options available upon request
Continue Reading
Free Shipping

COELBO Driver for one single phase pump with variable speed, 220V, 1PHASE, 116 PSI, IP65, Model ECODRIVE

Comments Off on COELBO Driver for one single phase pump with variable speed, 220V, 1PHASE, 116 PSI, IP65, Model ECODRIVE

Driver for one single-phase pump with variable speed. Plug and play unit.

General electric supply is single-phase 230 Vac. Easy to setup and operate, as it’s only necessary to connect and select the set point pressure. Individual assembly.

Made in Spain

Continue Reading
Free Shipping

COELBO Wall-mounted pump driver for a single pump at variable speed, 400V, 3PHASE, 362.5 PSI, IP65, Model SPEEDBOX 1314TT

Comments Off on COELBO Wall-mounted pump driver for a single pump at variable speed, 400V, 3PHASE, 362.5 PSI, IP65, Model SPEEDBOX 1314TT

Wall-mounted pump driver for a single pump at variable speed.

Designed for the automation of single-phase and 3-phase pumps managed by inverter. General electrical supply is ~1×230 or ~3×400 Vac -depending on model. It can be mounted individually or in groups of 4 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Made in Spain

Continue Reading
Free Shipping

COELBO Driver for one single-phase or 3-phase pump at variable speed, 230V, 116 PSI, IP55, Model SPEEDMATIC EASY MT10

Comments Off on COELBO Driver for one single-phase or 3-phase pump at variable speed, 230V, 116 PSI, IP55, Model SPEEDMATIC EASY MT10

Driver for one single-phase or 3-phase pump at variable speed. Plug and play unit.

General electric supply is single-phase 230 Vac. Easy to setup and operate, as it’s only necessary to connect and select the setpoint pressure. It can be mounted individually (only one pump) or in group of 2 pumps communicated and operating in MASTER-SLAVE mode with alternated sequence of operation.

Made in Spain

Continue Reading
Free Shipping

COELBO Electronic pump protector, 110/230, 1PHASE, 108 PSI, IP65, Model SAFEMATIC W

Comments Off on COELBO Electronic pump protector, 110/230, 1PHASE, 108 PSI, IP65, Model SAFEMATIC W

Electronic pump protection

This unit stops the pump when is detected a dry-running operation or an overload. It has an integrated Schuko socket for the pump connection. It has also a Schuko plug for the power supply connection, in case of other socket shapes there is a wall-mounted variant where the connection is performed through the lateral PG´s.

Made in Spain

Continue Reading
Free Shipping

COELBO Electronic pressure switch with 3ways fitting and non-return valve, complete pump protection, 110/230, 1PHASE, 108 PSI, IP65, Model T-KIT SWITCHMATIC 1

Comments Off on COELBO Electronic pressure switch with 3ways fitting and non-return valve, complete pump protection, 110/230, 1PHASE, 108 PSI, IP65, Model T-KIT SWITCHMATIC 1

Electronic pressure switch + 3 ways fitting + non-return valve + complet pump protection. Patented Model.

T-KIT Switchmatic is an electronic pressure switch integrated in a 3-ways fitting with a digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 kW). Cut-in and cut-out pressure implementation can be set easily and accurately through a users friendly control panel. Wiring is carried out identically to a conventional electromechanical switch.

It can operate as a differential pressure switch and as an inverted pressure switch. There is an internal non-return valve.

Made in Spain

Continue Reading