Description
6″ Deep Well Submersible Pump
| Brand | Gol Pumps |
| Manufacturer’s Warranty | 1 years Limited Warranty |
| Ship Weight | |
| Service Factor | 1.15 |
| Material | Stainless Steel 304 |
| Volts | 230 – Three Phase |
| In(A) Imax Istart | 22.1 24.2 139.0 |
| HP | 7.5 |
| KW | 5.5 |
| R.P.M | 3450 |
| Power factor% (Allowable load) Power factor% (Overload Factor) | 0.78 0.81 |
| Efficiency(Allowable load) Efficiency(Overload Factor) | 79.9 80.1 |
| Need Capacitor Need Starter | No Optional |
| Cable section (AWG) | 4 x 14 |
| Cable length (ft.) | 5.5 |
| Dimensions L x W x H (in.) | 5.5 x 5.5 x 24.7 |
| Product Weight (lbs.) | |
| Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 6” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
Pump type | Stages | Power | Current (A) | gal/h I/s | 0 | 1585 | 3170 | 3963 | 4491 | 5019 | 5548 | 6076 | 7397 | |
KW | HP | 0.00 | 1.67 | 3.33 | 4.17 | 4.72 | 5.28 | 5.83 | 6.39 | 7.78 | ||||
| A6X17CR07/06 | 6 | 5.5 | 7.5 | 11.3 | Head(ft) | 328 | 325 | 305 | 285 | 269 | 249 | 226 | 200 | 128 |
Dimensions and weights:
Pump type | Stages | Power | Dimensions | Weight(lb) | |||||||
KW | HP | L | LM | LP | M | P | Motor | Pump | Total | ||
| A6X17CR07/06 | 6 | 5.5 | 7.5 | 52 | 27 | 25 | 6 | 5 | 96 | 29 | 125 |
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap. Max. Immersion depth: 200m
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 30°C with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
PUMP SPEC:
- Max Head Pressure (ft): 328ft
- Max Flow(Gpm): 123
- Discharge: 2 1/2″
- Volts: 230V – Three Phase
- HP:7.5
- Pump Material: Stainless Steel 304
- Pump Model: A6X17CR07/06
