Free Shipping

SAER 8″ Stainless Steel 316 Submersible Motor – 125HP, 460V-3PH, 3 Wire, SS316

Comments Off on SAER 8″ Stainless Steel 316 Submersible Motor – 125HP, 460V-3PH, 3 Wire, SS316

Motor for radial or semi-axial submersible pumps, in wells with 8” diameter or bigger, basins or boosters for pressurization systems.

Product Advantages

  • A compensation membrane on the bottom of the motor ensures the balance between the internal and external pressures, along with the variation of the water volume due to the temperature.
  • Standard, double seal system on rotor shaft: bi-directional mechanical seal in SiC-AlO + sand-guard with laminar seal.
  • Rotation: clockwise or counter clockwise without distinction.
  • Cable material suitable for use with drinking water.
  • All motors 100% tested.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

SAER 6″ Stainless Steel 316 Submersible Motor – 50HP, 460V-3PH, 3 Wire, SS316 + PT100

Comments Off on SAER 6″ Stainless Steel 316 Submersible Motor – 50HP, 460V-3PH, 3 Wire, SS316 + PT100

Motor for radial or semi-axial submersible pumps, in wells with 6” diameter or bigger, basins or boosters for pressurization systems.

Product Advantages

  • A compensation membrane on the bottom of the motor ensures the balance between the internal and external pressures, along with the variation of the water volume due to the temperature.
  • Standard, double seal system on rotor shaft: bi-directional mechanical seal in SiC-AlO + sand-guard with laminar seal.
  • Rotation: clockwise or counter clockwise without distinction.
  • Cable material suitable for use with drinking water.
  • All motors 100% tested.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

SAER 6″ Stainless Steel 316 Submersible Motor – 50HP, 460V-3PH, 3 Wire, SS316

Comments Off on SAER 6″ Stainless Steel 316 Submersible Motor – 50HP, 460V-3PH, 3 Wire, SS316

Motor for radial or semi-axial submersible pumps, in wells with 6” diameter or bigger, basins or boosters for pressurization systems.

Product Advantages

  • A compensation membrane on the bottom of the motor ensures the balance between the internal and external pressures, along with the variation of the water volume due to the temperature.
  • Standard, double seal system on rotor shaft: bi-directional mechanical seal in SiC-AlO + sand-guard with laminar seal.
  • Rotation: clockwise or counter clockwise without distinction.
  • Cable material suitable for use with drinking water.
  • All motors 100% tested.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

10″ Stainless Steel 316 Submersible Motor – 150HP, 460V-3PH, 3 Wire, SS316

Comments Off on 10″ Stainless Steel 316 Submersible Motor – 150HP, 460V-3PH, 3 Wire, SS316

F.B.’s 10’’ rewindable motors are studied for long-term operation in wells with diameters of 10” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 150HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 150HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 125HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 125HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 100HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 100HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 90HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 90HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 75HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 75HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading
Free Shipping

8″ Stainless Steel 316 Submersible Motor – 60HP, 460V-3PH, 3 Wire, SS316

Comments Off on 8″ Stainless Steel 316 Submersible Motor – 60HP, 460V-3PH, 3 Wire, SS316

F.B.’s 8’’ rewindable motors are studied for long-term operation in wells with diameters of 8” or greater. Water-lubricated axial and radial bearings ensure a long service life and maintenance-free operation. The motors are pre-filled with a special antifreeze fluid so that they can be stored down to -59°F. A special membrane compensates the pressure inside the motor. BRONZE-ALUMINIUM, AISI 316, DUPLEX, AISI 904L and SUPER DUPLEX motors are available for applications in aggressive water.

Product Advantages

  • Industry-leading efficiency with low operating costs.
  • Sand protection: the sand-guard and silicon-carbide SIC-SIC mechanical seal protect against sand during operation.
  • The cast iron motor support has been treated with cataphoresis to prevent corrosion (STANDARD version).
  • The “Michell” bi-directional thrust bearing made of a resin and graphite compound can withstand up to 70.000N.
  • The rotors are balanced and ground along the whole axis.
  • The stators are generously dimensioned.
  • The windings are made by hand.
  • Disassembly and maintenance is exceptionally simple.
  • The power cable complies with drinking water regulations.
  • The motors are pre-filled with clear water and propylene glycol.
  • Ready for installation of a PT100 sensor.

Continue Reading