Description
SP 10″ Stainless Steel Submersible Pumps
SP 10″ submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology. The SP series of pumps are manufactured to the highest standards for energy efficiency, dependable performance, rugged construction and long service life for the most demanding applications.
Application
- Potable water supply
- Agricultural irrigation and livestock watering
- Municipal and industrial water supply
- Pressure boosting
- Mining applications
- Groundwater lowering
- Fountain
Pumped Liquids
Clean, thin, non-aggressive and non-corrosive liquids without solid particles or fibers.
Features
- Stainless steel construction designed and built for years of trouble free operation
- PT100 temperature sensor
- Designed and built to operate in difficult conditions.
- All metal parts are made of 304 or 316 stainless steel, except for the shafts, which are
made of 431 or 316 stainless steel. - Heavy duty stainless steel discharge head with built-in check valve for preventing back
flow in connection with pump stoppage and the risk of destructive water hammer is
reduced to a minimum. - NEMA standard of bracket mounting.
- High quality shaft bearings provide low friction and high wear resistance.
- The stop ring prevents damage to the pump during transport and in case of up-thrust in
connection with start-up. The stop ring, which is designed as a thrust bearing, limits axial
movements of the pump shaft. - Stainless steel strainer to restrict the entry of sand and other extraneous material.
Performance Curves
Selection Chart
Pump Type | Motor | Q capacity 3450 rpm | ||||||||||||||
P2 | m³/h | 36 | 54 | 72 | 90 | 108 | 126 | 144 | 162 | 180 | 198 | 216 | 234 | |||
KW | HP | G/min | 158 | 238 | 317 | 396 | 475 | 555 | 634 | 713 | 792 | 872 | 951 | 1030 | ||
SP 800-06 | 110 | 150 | Head(ft) | 899 | 876 | 837 | 794 | 745 | 705 | 672 | 640 | 607 | 564 | 505 | 436 |
Pump Material Specification
Dimensions and weights:
Pump Type | Motor Dia. | Dimensions (inch) | Net Weight (lb) | ||
A | C* | Pump Discharge | Pump | ||
SP 8000-6 | 8″ | 56 | 8 | 6″ NPT | 141 |
Motor Technical Datasheet:
Motor | Pmax | Un | In | Ia | n (Eff.) % | cos (PF) | r.p.m | Max. water T in °F | Cable | Cable L | ||||||||
HP | KW | V | A | A | 2/4 | 3/4 | 4/4 | 2/4 | 3/4 | 4/4 | n | N | PVC | PE2+PA | HT | (inch^2) | ft | |
10F150XC | 150 | 110 | 440 | 203 | 812 | 85.5 | 86 | 86 | 0.63 | 0.75 | 0.83 | 3490 | 70000 | 86 | 140 | 167 | / | 10 |
460 | 198 | 792 | 85.7 | 86.2 | 86.3 | 0.62 | 0.74 | 0.81 | 3499 | (0.9)x3 |
Motor Dimensions and Weights:
Motor Type | Lenght | Net weight | Case dimensions (inch) | Gross weight | ||
inch | lb | A | B | C | lb | |
8F150XC | 74 | 589 | 75 | 11 | 16 | 626 |
8″ Coupling – Nema:
Pos. | Qt. | Components | Material AISI 316 |
1 | 1 | Sand guard | NBR 90 |
2 | 1/2 | Ring nut | AISIS 316 / Wr 14401 |
3 | 2/4 | Cable-press | Plastic |
4 | 1/2 | Cable-press gasket | NBR 45 |
5 | 4 | Nut | AISIS 316 / Wr 14401 |
6 | 4 | Washer | AISIS 316 / Wr 14401 |
7 | 1 | Upper flange | AISIS 316 / Wr 14401 |
8 | 4 | Screw | AISIS 316 / Wr 14401 |
9 | 1 | Screw | AISIS 316 / Wr 14401 |
10 | 1 | Mechanical Seal | SIC + SIC + NBR |
11 | 4 | Gasket | Paper |
12 | 1 | Upper support | AISIS 316 / Wr 14401 |
13 | 2/3/4 | Seal bushing | Graphite |
14 | 1 | Stator | AISIS 316 / Wr 14401 |
15 | 3/6 | Single core round cable | EPR 0.6-1 KV |
16 | 8 | Upper tension rod | AISIS 316 / Wr 14401 |
17 | 16 | Gasket | / |
18 | 16 | Washer | AISIS 316 / Wr 14401 |
19 | 16 | Nut | AISIS 316 / Wr 14401 |
20 | 2 | Washer | / |
21 | 1 | Plug | AISIS 316 / Wr 14401 |
21A | 1 | Valve | AISIS 316 / Wr 14401 |
22 | 1 | Rotor | Duplex / Wr 14462 |
23 | 1 | Key | Iron |
24 | 1 | Lower support | AISIS 316 / Wr 14401 |
25 | 1 | Striker disk | Plastic |
26 | 1 | Screw | AISIS 304 / Wr 14301 |
27 | 4 | Thrust disk | Steel/Graphite/Resin |
28 | 1 | Seeger ring | Iron |
29 | 1 | Thrust sliding | AISIS 420 |
30 | 6 | Base | AISIS 316 / Wr 14401 |
31 | 1 | Screw | Iron |
32 | 1 | Nut | Iron |
33 | 1 | Internal over | AISIS 304 / Wr 14301 |
34 | 1 | Membrane | NBR 60 |
35 | 1 | External cover | AISIS 316 / Wr 14401 |
36 | 4 | Screw | AISIS 316 / Wr 14401 |
37 | 8 | Lower tension rod | AISIS 316 / Wr 14401 |
38 | 1 | Complete thrust bearing | / |
39 | 1 | Protective ring | PA 66 |