SHIPPING
PREMIUM DELIVERY
WAREHOUSE PICKUP
Description
SP 10″ Stainless Steel Submersible Pumps
SP 10″ submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology. The SP series of pumps are manufactured to the highest standards for energy efficiency, dependable performance, rugged construction and long service life for the most demanding applications.
Application
- Potable water supply
- Agricultural irrigation and livestock watering
- Municipal and industrial water supply
- Pressure boosting
- Mining applications
- Groundwater lowering
- Fountain
Pumped Liquids
Clean, thin, non-aggressive and non-corrosive liquids without solid particles or fibers.
Features
- Stainless steel construction designed and built for years of trouble free operation
- PT100 temperature sensor
- Designed and built to operate in difficult conditions.
- All metal parts are made of 304 or 316 stainless steel, except for the shafts, which are
made of 431 or 316 stainless steel. - Heavy duty stainless steel discharge head with built-in check valve for preventing back
flow in connection with pump stoppage and the risk of destructive water hammer is
reduced to a minimum. - NEMA standard of bracket mounting.
- High quality shaft bearings provide low friction and high wear resistance.
- The stop ring prevents damage to the pump during transport and in case of up-thrust in
connection with start-up. The stop ring, which is designed as a thrust bearing, limits axial
movements of the pump shaft. - Stainless steel strainer to restrict the entry of sand and other extraneous material.
Performance Curves
Selection Chart
| Pump Type | Motor | Q capacity 3450 rpm | ||||||||||||||
| P2 | m³/h | 36 | 54 | 72 | 90 | 108 | 126 | 144 | 162 | 180 | 198 | 216 | 234 | |||
| KW | HP | G/min | 158 | 238 | 317 | 396 | 475 | 555 | 634 | 713 | 792 | 872 | 951 | 1030 | ||
| SP 800-05 | 93 | 125 | Head(ft) | 748 | 728 | 695 | 659 | 620 | 584 | 558 | 531 | 502 | 469 | 423 | 364 | |
Pump Material Specification
Dimensions and weights:
| Pump Type | Motor Dia. | Dimensions (inch) | Net Weight (lb) | ||
| A | C* | Pump Discharge | Pump | ||
| SP 8000-5 | 10″ | 74 | 9 | 6″ NPT | 198 |
Motor Technical Datasheet:
| Motor | Pmax | Un | In | Ia | n (Eff.) % | cos (PF) | r.p.m | Max. water T in °F | Cable | Cable L | ||||||||
| HP | KW | V | A | A | 2/4 | 3/4 | 4/4 | 2/4 | 3/4 | 4/4 | n | N | PVC | PE2+PA | HT | (inch^2) | ft | |
| 8F125XC | 125 | 93 | 440 | 165 | 660 | 87.1 | 87.8 | 87.6 | 0.67 | 0.78 | 0.84 | 3487 | 70000 | 86 | 140 | 167 | / | 8 |
| 460 | 158 | 632 | 87.9 | 88.4 | 88.5 | 0.66 | 0.77 | 0.83 | 3500 | (0.9)x3 | ||||||||
Motor Dimensions and Weights:
| Motor Type | Lenght | Net weight | Case dimensions (inch) | Gross weight | ||
| inch | lb | A | B | C | lb | |
| 8F125XC | 70 | 553 | 71 | 11 | 16 | 591 |
8″ Coupling – Nema:
| Pos. | Qt. | Components | Material AISI 316 |
| 1 | 1 | Sand guard | NBR 90 |
| 2 | 1/2 | Ring nut | AISIS 316 / Wr 14401 |
| 3 | 2/4 | Cable-press | Plastic |
| 4 | 1/2 | Cable-press gasket | NBR 45 |
| 5 | 4 | Nut | AISIS 316 / Wr 14401 |
| 6 | 4 | Washer | AISIS 316 / Wr 14401 |
| 7 | 1 | Upper flange | AISIS 316 / Wr 14401 |
| 8 | 4 | Screw | AISIS 316 / Wr 14401 |
| 9 | 1 | Screw | AISIS 316 / Wr 14401 |
| 10 | 1 | Mechanical Seal | SIC + SIC + NBR |
| 11 | 4 | Gasket | Paper |
| 12 | 1 | Upper support | AISIS 316 / Wr 14401 |
| 13 | 2/3/4 | Seal bushing | Graphite |
| 14 | 1 | Stator | AISIS 316 / Wr 14401 |
| 15 | 3/6 | Single core round cable | EPR 0.6-1 KV |
| 16 | 8 | Upper tension rod | AISIS 316 / Wr 14401 |
| 17 | 16 | Gasket | / |
| 18 | 16 | Washer | AISIS 316 / Wr 14401 |
| 19 | 16 | Nut | AISIS 316 / Wr 14401 |
| 20 | 2 | Washer | / |
| 21 | 1 | Plug | AISIS 316 / Wr 14401 |
| 21A | 1 | Valve | AISIS 316 / Wr 14401 |
| 22 | 1 | Rotor | Duplex / Wr 14462 |
| 23 | 1 | Key | Iron |
| 24 | 1 | Lower support | AISIS 316 / Wr 14401 |
| 25 | 1 | Striker disk | Plastic |
| 26 | 1 | Screw | AISIS 304 / Wr 14301 |
| 27 | 4 | Thrust disk | Steel/Graphite/Resin |
| 28 | 1 | Seeger ring | Iron |
| 29 | 1 | Thrust sliding | AISIS 420 |
| 30 | 6 | Base | AISIS 316 / Wr 14401 |
| 31 | 1 | Screw | Iron |
| 32 | 1 | Nut | Iron |
| 33 | 1 | Internal over | AISIS 304 / Wr 14301 |
| 34 | 1 | Membrane | NBR 60 |
| 35 | 1 | External cover | AISIS 316 / Wr 14401 |
| 36 | 4 | Screw | AISIS 316 / Wr 14401 |
| 37 | 8 | Lower tension rod | AISIS 316 / Wr 14401 |
| 38 | 1 | Complete thrust bearing | / |
| 39 | 1 | Protective ring | PA 66 |
