1 HP Submersible 2-Wire Motor 1920 GPH Deep Well Water Pump – 230V – 1PH – SS316 – 4″ – 214ft

$799.99

 

GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.

Product advantages

  • Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
  • High efficiency provides operation cost savings Thrust pad
  • Copper wiring
  • Pressure equalizing diaphragm
  • Removable lead connector
  • Control boxes available for single phase motor Standard NEMA mounting dimensions

Technical specifications

  • Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap.
  • Protection: IP68
  • Nos. of start per hour: max 20 at regular intervals.
  • Sand slinger and lip seal.
  • Insulation: Class F
  • Rated ambient temperature: 86°C with min.
  • Cooling flow 0.08 m/s of water flow speed
  • Standard installation position: vertical and horizontal

PUMP SPEC:

  • Max Head(ft): 214
  • Max Flow(Gpm): 32
  • Discharge: 1 ½” NPT
  • HP: 1
  • Pump Material: Stainless Steel 316
  • Pump Model: SP 2507

 Made in Taiwan 

Estimated Delivery Time: 3 – 5 Business Days

 

Description

Model 7060212
Brand Gol Pumps
Manufacturer’s Warranty 1 years Limited Warranty
Service Factor 1.4
Material Stainless Steel 316
Volts 230V – Single Phase
In(A)

Imax

Istart

5.4

6.7

24.2

HP 1
KW 0.75
R.P.M 3450
PF Allowable load %

PF Overload Factor %

0.97

0.98

Efficiency(Allowable load%)

Efficiency(Overload Factor%)

62.6

68.2

Need Capacitor Box

Need Starter

No

Optional

Cable section (AWG) 14
Cable length (ft.) 4
Dimensions L x W x H (in.) 3.9 x 3.9 x 27
Product Weight (lbs.)
Production Country Taiwan

GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.

MOTOR Materials:

  • -Upper/Lower Bracket: AISI 316 Over Iron
  • -Stator Shell: AISI 316
  • -Shaft: AISI 630
  • -Seal Cover: Nylon
  • -Lip Seal: NBR
  • -Diaphragm: NBR
  • -Sand Slinger: NBR
  • -Lead Wire (Cable): XLPE
  • -Bolts and Screws: AISI 316
  • -Lead Potting: Epoxy
  • -Kingsbury Thrust Bearing: 402J2

PUMP SPEC:

  • Max Head(ft): 214
  • Max Flow(Gpm): 32
  • Discharge: 1 ½” NPT
  • HP: 1
  • Pump Material: Stainless Steel 316
  • Pump Model: SP 2507

Product advantages

  • Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
  • High efficiency provides operation cost savings Thrust pad
  • Copper wiring
  • Pressure equalizing diaphragm
  • Removable lead connector
  • Control boxes available for single phase motor Standard NEMA mounting dimensions

Technical specifications

  • Upper bracket: Cataphoresis treated cast iron plus SS316 cover cap.
  • Protection: IP68
  • Nos. of start per hour: max 20 at regular intervals.
  • Sand slinger and lip seal.
  • Insulation: Class F
  • Rated ambient temperature: 86°F with min.
  • Cooling flow 0.08 m/s of water flow speed
  • Standard installation position: vertical and horizontal

 Made in Taiwan 


Reviews

There are no reviews yet.

Be the first to review “1 HP Submersible 2-Wire Motor 1920 GPH Deep Well Water Pump – 230V – 1PH – SS316 – 4″ – 214ft”

Your email address will not be published. Required fields are marked *