WEG SOFT STARTER - 40HP - 208-480VAC - SSW05 WEG - SSW050060T2246EPZ

WEG SOFT STARTER - 40HP - 208-480VAC - SSW05 WEG - SSW050060T2246EPZ

SKU 5172506 Categories ,

WEG SOFT STARTER - 40HP - 208-480VAC - SSW05 WEG - SSW050060T2246EPZ

The WEG SSW05 Soft Starter is a super compact fully digital soft starter with a state-of-the-art DSP controller. Its digital construction provides optimum operation, diagnostics capability and full motor protection. Simplicity in set-up and operation is assured since all parameters and set-up selections are made via dip switches and potentiometers. Status LED’s alert the user of the operational status of the SSW05. Simplicity, ease of set-up, and Small panel assures quick and easy installation and operation.

colors.png Warranty

colors.png Catalog

colors.png User Manual

------

$1,044.84

Add to Cart
SKU 5172506 Categories ,

Cart

Search Products

Categories

Category

Facebook

 

  Technical Data
Part NumberSSW050060T2246EPZ
Item#5172506
Base Unit of MeasureEach
Horsepower40 hp
Voltage208 to 480V AC
Warranty18 Months
PhaseThree Phase
OptionsBuilt-In Bypass
RatingsIP00
Product SeriesSSW05
Amp Rating60 Amp
AvailabilityIn stock
ManufacturerWEG
Dimensions(inch) HxWxD7.3 x 3.1 x 6.8
ApplicationsPUMPS, FANS, BLOWER, COMPRESSORS
CertificationsUL – CE – CS – IRAM – CPT – EAC

 

  Technical Data
Power Supply
Main Voltage
Control Voltage
Frequency
220 … 460 Vac (+10%,-15%)
90 …250 Vac
50 / 60Hz(+/- 5Hz)
Enclosure IP00 Protected Chassis
Duty  Cycle 300% rated current during 10 seconds, 4 starts per hour
Control InputsDigital
One input for Start/Stop (90-250 Vac)
One input for Fault Reset (90 – 250 Vac)
Control OutputsDigital
One relay output for Run indication (1 Amp – 250V)
One relay output for Ful Voltage indication (1Amp – 250V)
CommunicationSerial InterfaceRS-232C
SafetyProtections
Motor overload*
Locked rotor*
Over current
Phase sequence
Phase loss
Safety*Can be disabledSCR overload
Control Features
Pedestal Voltage
Accel Ramp
Decel Ramp
Motor Current
Fault Reset
30 …80% of line voltage
1 …20 Seconds
off …20 seconds
30 … 10% of SSW-05 rating
Manual or Automatic
AmbienteTemperatura32 …131°F (0-55°C)
AmbienteHumidity0 …90% Non Condensing
AmbienteAltitude
0…1000m (3.300ft) – Standard Operation at Rated Current
Up to 4000m (13200 ft) – With Current Derating

(1%/100m (328ft) above 1000m (13,200ft))

Conformitieslow Voltage
UL 508 – Industrial Control Equipment
IEC 60947-4-2
ConformitiesEMCEMC Directive 89/336 / EEC – Industrial Environ-ment, Class A

 

The WEG SSW05 Soft Starter is a super compact fully digital soft starter with a state-of-the-art DSP controller. Its digital construction provides optimum operation, diagnostics capability and full motor protection. Simplicity in set-up and operation is assured since all parameters and set-up selections are made via dip switches and potentiometers. Status LED’s alert the user of the operational status of the SSW05. Simplicity, ease of set-up, and Small panel assures quick and easy installation and operation.

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost/benefit ratio.

The Operator Interface allows easy parameter setting, simplyfying the start-up and operation activities.

The SSW05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and incorporates all protections for the driven motor.

FREE SHIPPING
WEG SOFT STARTER - 40HP - 208-480VAC - SSW05 WEG - SSW050060T2246EPZ
$1,044.84
%d bloggers like this:

EASY SELECTOR