4″ Deep Well Submersible Motor — 3HP — 2.2Kw — 230V — 3PH – 60Hz – SS304

$630.00

 

GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.

Product advantages

  • Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
  • High efficiency provides operation cost savings Thrust pad
  • Copper wiring
  • Pressure equalizing diaphragm
  • Removable lead connector
  • Control boxes available for single phase motor Standard NEMA mounting dimensions

Technical specifications

  • Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap.
  • Max. Immersion depth: 985 ft.
  • Protection: IP68
  • Nos. of start per hour: max 20 at regular intervals.
  • Sand slinger and lip seal.
  • Insulation: Class F
  • Rated ambient temperature: 86°C with min.
  • Cooling flow 0.08 m/s of water flow speed
  • Standard installation position: vertical and horizontal

 Made in Taiwan 

Estimated Delivery Time: 3 – 5 Business Days

 

Description

Model 5331118
Brand Gol Pumps
Manufacturer’s Warranty 1 years Limited Warranty
Service Factor 1.15
Material Stainless Steel 304
Volts 230 – Three Phase
In(A)

Imax

Istart

9.8

10.6

56.0

HP 3
KW 2.2
R.P.M 3450
PF Allowable load %

PF Overload Factor %

0.73

0.77

Efficiency(Allowable load%)

Efficiency(Overload Factor%)

77.1

77.2

Need Capacitor Box

Need Starter

No

Optional

Cable section (AWG) 14
Cable length (ft.) 4
Dimensions L x W x H (in.) 3.8 x 3.8 x 15.6
Product Weight (lbs.)
Production Country Taiwan

GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.

Materials:

  • -Upper/Lower Bracket: AISI 304 Over Iron
  • -Stator Shell: AISI 304
  • -Shaft: AISI 420
  • -Seal Cover: Nylon
  • -Lip Seal: NBR
  • -Diaphragm: NBR
  • -Sand Slinger: NBR
  • -Lead Wire (Cable): XLPE
  • -Bolts and Screws: AISI 304
  • -Lead Potting: Epoxy
  • -Kingsbury Thrust Bearing: 402J2

Product advantages

  • Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
  • High efficiency provides operation cost savings Thrust pad
  • Copper wiring
  • Pressure equalizing diaphragm
  • Removable lead connector
  • Control boxes available for single phase motor Standard NEMA mounting dimensions

Technical specifications

  • Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap.
  • Max. Immersion depth: 985 ft.
  • Protection: IP68
  • Nos. of start per hour: max 20 at regular intervals.
  • Sand slinger and lip seal.
  • Insulation: Class F
  • Rated ambient temperature: 86°F with min.
  • Cooling flow 0.08 m/s of water flow speed
  • Standard installation position: vertical and horizontal

 Made in Taiwan 

Reviews

There are no reviews yet.

Be the first to review “4″ Deep Well Submersible Motor — 3HP — 2.2Kw — 230V — 3PH – 60Hz – SS304”

Your email address will not be published. Required fields are marked *